About Us

» The Company

» Quality Policy

Products :

Yog manufactures Thermocouples, Resistance Temperature Detectors, Temperature Transducers, wide range of Digital Temperature Indicator/Controllers, Scanners, Recorders, Transmitters to monitor and control various industrial processes.

Thermocouples

'K' (Chromel-Alumel).
'J' (Iron-Constantan).
'T' (Copper- Constantan).
'E' (Chromel-Constantan). 'R' (Pt-Pt-13%-Rh).
'S' (Pt-Pt-10%Rh). 'B' (Pt-13%-Rh-Pt-6%Rh) in Simplex, Duplex and Triplex

Resistance Temperature Detectors

Pt-50, Pt-100. Pt-500, Pt-1000, Ni-100, Cu-200 in Simplex, Duplex and Triplex.

Types of Insulation : Ceramic insulation and Mineral insulation.
Types of Junction : Grounded, Ungrounded (Isolated)
Types of Sheath : Mild steel, SS 304, SS 316, SS 446, SS 310, Inconel 600. Inconel 800, Titanium, Cast Iron. Nickel, Brass, Copper, Aluminium, Ceramic (610), Recrystised Alumina (KER 710). etc.

Dimensions : Diameter of sheath from 0.08 mm up to 25.4 mm In case of Cast Iron Sheath 12 mm up to 50 mm or more. (In exceptional case diameter can be Increased).

Immersion length : As per the requirement or application/custom built.
Shapes & Sizes : As per the requirement or application.

Temperature Controller

Model A : YOG-062 Single Set
Model B : YOG-062/D Double Set

Specifications

Input
RTD (Pt-100) Thermocouples (Fe-Con-'J'/Cr-Al 'K'/Pt. Pt. Rh. 10% 'S'/Pt. Pt. Rh 13% 'R' etc.)

Range
For RTD (Pt-100) - 100⁰C to 199.9⁰C (Resolution 0.1⁰C) or 0⁰C to 500⁰C (Resolution 1⁰C) For
Fe-Con 'J' - 0⁰C to 600⁰C
Cr-Al 'K' - 0⁰C to 1200⁰C
Pt. Pt. Rh. 10% 'S' - 1000⁰C to 1600⁰C
Pt. Pt. Rh. 13% 'R' 1000⁰C to 1600⁰C

Indication : Seven Segment LED 3.5 Digit 1/2" size.
Accuracy of Indication : ±0.5% of FSD ± 1 Digit.
Control Accuracy : 1⁰C to 2⁰C Nominal (Can be adjusted)
Relay : Contact rating 5 Amps/230 Volt AC.
Operating Temperature ⁰C to 50⁰C
Supply Voltage 230 VAC±10%

Size
A) 96 x 96 x 110 mm (WxHxD) one or two set point controller. Panel cut out : 92 x 92 mm.
B) 72 x 72 x 110 mm (WxHxD) one set point Controller. Panel cut out : 68 x 68 mm.

Temperature Indicator

Model : YOG-026

Specifications

Input
RTD (pt-100) Thermocouples (Fe-Con- 'J'/Cr-Al 'K'/Pt. Pt. Rh. 10% 'S'/ Pt. Pt. Rh. 13% 'R' etc.)

Range
For RTD (Pt-100) - 100⁰C to 199.9⁰C (Resolution 0.1⁰C) or 0⁰C to 500⁰C (Resolution 1⁰C) For
Fe-Con 'J' - 0⁰C to 600⁰C
Cr-Al 'K' - 0⁰C to 1200⁰C
Pt. Pt. Rh. 10% 'S' - 1000⁰C to 1600⁰C
Pt. Pt. Rh. 13% 'R' 1000⁰C to 1600⁰C

Specifications

Input
RTD (pt-100) Thermocouples (Fe-Con- 'J'/Cr-Al 'K'/Pt. Pt. Rh. 10% 'S'/ Pt. Pt. Rh. 13% 'R' etc.)

Range
For RTD (Pt-100) - 100⁰C to 199.9⁰C (Resolution 0.1⁰C) or 0⁰C to 500⁰C (Resolution 1⁰C) For
Fe-Con 'J' - 0⁰C to 600⁰C
Cr-Al 'K' - 0⁰C to 1200⁰C
Pt. Pt. Rh. 10% 'S' - 1000⁰C to 1600⁰C
Pt. Pt. Rh. 13% 'R' 1000⁰C to 1600⁰C

Indication : Seven Segment LED 3.5 Digit 1/2" size.
Accuracy of Indication : ±0.5% of full scale Deflection 1 Digit.
Operating Temperature ⁰C to 50⁰C
Supply Voltage 230 VAC±10%

Size
A) 96 x 96 x 110 mm (W x H x D) Panel cut out : 92 x 92 mm.
B) 96 x 48 x 110 mm (W x H x D) for half DIN type indicator.. Panel cut out : 92 x 45 mm.
B) 72 x 72 x 110 mm (W x H x D) Panel cut out : 68 x 68 mm.

Temperature Indicator Portable

Model : YOG-053

Specifications

Input : RTD (pt-100) Thermocouples (Fe-Con- 'J'/Cr-Al 'K'/Pt. Pt. Rh. 10% 'S'/ Pt. Pt. Rh. 13% 'R' etc.)

Range
For RTD (Pt-100) - 100⁰C to 199.9⁰C (Resolution 0.1⁰C) or 0⁰C to 500⁰C (Resolution 1⁰C) For
Fe-Con 'J' - 0⁰C to 600⁰C
Cr-Al 'K' - 0⁰C to 1200⁰C
Pt. Pt. Rh. 10% 'S' - 1000⁰C to 1600⁰C
Pt. Pt. Rh. 13% 'R' 1000⁰C to 1600⁰C

Indication : Seven Segment LCD 3.5 Digit 1/2" size.
Accuracy of Indication : ±0.5% of full scale Deflection ±1 Digit.
Operating Temperature ⁰C to 50⁰C
Supply Voltage 9V Battery

Input with RF/3Pin/Omga Connector
Press to Hold facility available as per requirement

Temperature Transmitter

Types Head Mounted Transmitter
Din Rail Transmitter

Specifications

Input : Pt-100 RTD, 2 or 3 wire / Thermocouple
Output : 2 wire 4 to 20 mA corresponding to defined input temperature range.
Operating Voltage : Nominally 24 V d.c., can range from 12 V to 36V. (For RTD only.)
Maximum Load In Loop : (Loop supply Voltage 12V) / 20mA (220 0hm for 24V d.c. supply)
Lead Wire Error for 3 Wire RTD : Less than 0.005% of span per meter of 14/36 DIN leads.
Basic Accuracy : ± 0.5% of FSD.
Change of Current 0/P with Ambient Tempreture : <± 0.01% of span per ⁰C Change.
Change of Current 0/P with Supply Voltage : <0.001% of span per Volt. from 12 V to 36 V.
Linearisation Ciruitry Error : <0.05% of span at any current.
Ambient Operating Temperature Range : 0⁰C to 70⁰C.
Indication(s) : Red LED "ON" indicates that unit is operating in loop.
Protection : Reserve polarity protected to 500 V surge suppression at 50 V d.c.
Operating Humidity Limit : 5 to 90% Non-condensing. Material of Encapsulation Epoxy.

Accessories for temp. Transducers

Other Product Range

Solid State Relay	Proximity / Flow / Level Switches	Humidity Sensors
PID Controller	Scanner	Data Logger with RS port output
Timer	Countersl	Humidity & Pressure Transmitters

Temperature Indicators - (Flameproof Housing) Model YOG-026/FLP

Indication : 3 ¹/2 Digit seven segment LED ¹/2" & 1" size
Accuracy of Indication : ±0.5% of FSD±1 Digit.
Operating Temperature : ⁰C to 50⁰C
Supply : 230VAC±10%
Flameproof Housing : As IS : 2148/2004
Degree of Protection : As per IS : 12063/1987

Temperature Indicating Controller - (Flameproof Housing) Model YOG-062/FLP

Specifications

Input
RTD (pt-100), Thermocouples

Range
For RTD (Pt-100) - 100⁰C to 199.9⁰C (Resolution 0.1⁰C) for RTD (Pt-100) -100⁰C to 400⁰C (Resolution 1⁰C)
For 'J' (Fe-K) 0⁰C to 600⁰C
For 'K' (Cr-Al) - 0⁰C to 1200⁰C
For 'S' (Pt. Pt-10%Rh) 1000⁰C to 1600⁰C
For 'R' (Pt. Pt-13%Rh) 1000⁰C to 1600⁰C

Indication : 3 ¹/2 Digit seven segment LED ¹/2" & 1" size
Accuracy of Indication : ±0.5% of FSD±1 Digit.
Operating Temperature : ⁰C to 50⁰C
Supply : 230VAC±10%
Control Accuracy : 1⁰C or 2⁰C nominal (Can be adjusted)
Output : Relay contact rating 5 Amps potential free
Flameproof Housing : As IS : 2148/2004
Degree of Protection : As per IS : 12063/1987

Temperature Scanner - Model YOG-026/SCN

Specifications

Input
RTD (pt-100), Thermocouples

Range
For RTD (Pt-100) - 100⁰C to 199.9⁰C (Resolution 0.1⁰C)-100⁰C to 400⁰C (Resolution 1⁰C)
For 'J' (Fe-K) 0⁰C to 600⁰C
For 'K' (Cr-Al) - 0⁰C to 1200⁰C
For 'S' (Pt. Pt-10%Rh) 1000⁰C to 1600⁰C
For 'R' (Pt. Pt-13%Rh) 1000⁰C to 1600⁰C

Indication : 3 ¹/2 Digit seven segment LED ¹/2" & 1" size display
Accuracy of Indication : ±0.5% of FSD±1 Digit.
Operating Temperature : ⁰C to 50⁰C
Supply : 230VAC±10%
Number or Channels : 8
Channel Indication : LED with Numbers
Scan Time : 5 to 30 Sec (Adjustable)
Reset : Press switch to reset to channel number 1
Hold : To display particular channel continuously
Calibration : Individual channel calibration facility

Temperature Switch - Model YOG-062/TS

Specifications

Input : Thermocouples 'K' (Cr-Al)
Range : ⁰C to 400⁰C
Control Accuracy : 2⁰C nominal (Can be adjusted)
Output : Relay contact rating 5 Amps potential free
Temperature Set : Potentiometer on front panel
Accuracy : ±1% of FSD
Mounting : DIN Rail

Temperature Indicator - Model YOG-026/WM

Indication : 3 ¹/2 Digit seven segment LED 2" size
Accuracy of Indication : ±0.5% of FSD±1 Digit.
Operating Temperature : ⁰C to 50⁰C
Supply : 230VAC±10%

Digital Temperature Gauges - Model YOG-026/TG

Specifications

Input
RTD (pt-100) & Thermocouples 'K' (Cr-Al)

Range
For RTD (Pt-100) - 100⁰C to 199.9⁰C (Resolution 0.1⁰C) for RTD (Pt-100) -100⁰C to +400⁰C (Resolution 1⁰C) For Thermocouple 'K' (Cr-Al) 0-400⁰C

Indication : 3 ¹/2 Digit seven segment LCD ¹/2" size
Accuracy of Indication : ±0.5% of FSD±1 Digit.
Operating Temperature : ⁰C to 50⁰C
Supply : 9V battery
Probe dia : 6.35mm, 8mm, 9.5mm
Probe length : As per your requirement

Top

Best View : 1024 X 768